RIG Icom M200 VHF Marine Transceiver

VHF Fixed Mount – Export Only

The M200 gives you the same Icom performance and reliability boaters expect in a fixed mount but at a great value. This small compact unit includes a large easy to read LCD plus is IPX7 rated and comes with the AquaQuake draining function for optimal audio. This is a perfect radio for boats that need a basic radio or boats with limited space.

Output power:

25W

Waterproof rating:

IPX7

Features

  • Dualwatch and tri-watch function
  • Favorite channel function
  • Built-in ultra-stable TCXO for reliable frequency stability
  • Channel operation with the hand microphone, HM-164B, in your hand
  • Instant-access button for Channel 16 and call channel
  • Priority scan and normal scan
  • Built-in low voltage indicator
  • Keypad backlighting
Category: Product Brand:

Description

RIG Icom M200 VHF Marine Transceiver

Specifications

General
Frequency Range
Tx
Rx
156.025–162000MHz
156.025–162.025MHz
Usable channels INT, USA, CAN channels
Type of emission 16K0G3E (FM)
Power supply voltage 13.8V DC nominal
1.5A (Maximum)
Current drain
Tx (at 25W output)
Rx (Maximum audio)
5.5A (Maximum)
200mA
Operating temperature range –20°C to +60°C; –4°F to +140°F
Antenna Impedance 50Ω
Dimensions (W×H×D)
(Projections not included)
153×67×133 mm;
6.0×2.6×5.2 inch
Weight (approximately) 790g; 1.7lb
Transmitter
Output power (Hi/Mid/Low) 25W (High power)
1W (Low power)
Modulation Variable reactance frequency
modulation
Max. frequency deviation ±5kHz
Frequency stability ±5ppm
Spurious emissions Less than –70dBc (High power)
Less than –56dBc (Low power)
Adjacent channel power More than 70dB
Audio harmonic distortion Less than 10% (at 60% dev.)
Residual modulation More than 40dB
Receiver
Intermediate frequency

1st

2nd

21.7MHz
450kHz
Sensitivity –14dBμ typ. (at 12dB SINAD)
Squelch sensitivity Less than –10dBμ
Adjacent Channel Selectivity 75dB typical
Spurious response 75dB typical
Intermodulation 75dB typical
Hum and noise ratio More than 40dB
Audio output power 4.5W typical
(at 10% distortion with a 4Ω load)

Applicable U.S. Military Standards

Standard MIL 810 G
Method Proc
Temp Shock 503.5 I
Rain Blowing/Drip 506.5 I, III
Humidity 507.5
Salt Fog 509.5
Vibration 514.6 I
Shock 516.6 II

Also meets equivalent MIL-STD-810-C, -D, -E and -F.

Applicable IP Rating

Ingress Protection Standard
Water IPX7 (Waterproof protection)